Dr Who Models

Dr Who Model Gallery.

To go back to the Main Menu or click Here

Click on thumbnail to see larger image.

Sontaran's.

Cyber Controller.

Sontaran's, from The Two Doctors.


1.Sontaran soldier holding helmet. 2.Sontaran Group Marshall Stike. 3.Sontaran soldier wearing helmet. These are figures from the Dr Who range by Dapol and are in 1/16th scale. The figures have been modified slightly, the joints filled, then given a complete repaint. These figures are now deleted, as is the entire Dapol Dr Who range.		Another 1/1 scale fibre glass head that I have refurbished for a friend. The first picture shows the Cybercontroller head with all major sanding and filling work completed, ready to have a coat of grey primer and then fine surface filler applied where ever needed. The other two pictures show the completed head after painting and a coat of lacquer has been applied.		Sontaran Group Marshall Stike issues orders his underlings. This diorama is based on the episode 'The Two Doctors' and uses figures from the Dr Who range by Dapol. The figures have been modified slightly, and the joints filled, then the figures were given a complete repaint. These figures are now deleted.

Cybermat.

Auton Head.

25mm Daleks.

1/1 scale Vac Form replica that I have built and refurbished for a friend.

1/1 scale fibre glass Head. The pink colour for the Auton head had to be mixed by spraying paint from the cans into a smaller jar, so that the paint could be mixed into the correct colour, and then thinned enough for it to be applied by Air brush. Two coats of Lacquer were applied to the painted head, and when this was fully dry the head was highly polished.

25 mm scale white metal & injection plastic Daleks. The Battle Daleks are injection plastic, the Engineer Dalek is white metal. Produced by Citadel Miniatures/Games Workshop. These figures have long been deleted.

Tomb of the Cybermen.

Dalek.

Tomb of the Cybermen.

Three level version 25mm scale diorama using Harlequin Dr Who Miniatures. Some of the Cyber men had their poses altered to make them look as if they were exiting the tombs. The tomb was constructed from Balsa wood and clear acrylic sheet, then lightly textured and painted to represent frosted metal. These figures are now deleted.

1/6th scale vac form plastic kit. Produced by Sevan's Models. This model is now deleted.

Two level Version. 25mm scale diorama using Harlequin Dr Who Miniatures. Some of the Cyber men had their poses altered to make them look as if they were exiting the tombs. The tomb was constructed from Balsa wood and clear acrylic sheet, then lightly textured and painted to represent frosted metal.

Sea Devil's.

Dalek on Hover Platorm.

The Silurians.

The Sea Devils rise from the depths to attack. This diorama is based on the episode 'Dr Who and the Sea Devils' and uses figures from the Dr Who range by Dapol. The figures have been modified slightly, and the joints filled, then the figures were given a complete repaint. The water and sand effects were made from interior filler. These figures are now deleted.

Dalek on Hover platform, the Dalek is a modified and repainted Dapol Dalek, the Hover platform is scratch built. These Daleks are now deleted.

The Silurians prowl their underground lair. This diorama is based on the epiosode 'Dr Who and the Silurians' and uses figures from the Dr Who range by Dapol. The figures have been modified and the joints filled, the figures were given a complete repaint, and then set in a cavern setting. These figures are now deleted.

Cyberman.

Sea Devils.

Web Planet.

Dr Who.

1/6th scale vac form plastic kit. Produced by Sevan's Models. This figures is now deleted.

25mm scale diorama using Harlequin Dr Who Miniatures. Two of the Sea Devil's were cut at ankle and waist to represent different water depth, the sand and water were made using interior filler. These figures are now deleted.

25mm scale diorama using Harlequin Dr Who Miniatures. These figures are now deleted.

1/8th scale vinyl kit. Produced by Comet Miniatures. This figure is now deleted.

Teraleptil.

Ice Warrior head.

1/1 scale Latex Sea Devil head. The Sea Devil head was completely painted with dark green spray paint straight from the can, then a fine coat of matt black was sprayed into the recessed area of the head, a lighter green was used to apply highlights, again applied straight from the can. The sandy tan colour was a mix of red car primer and yellow decanted into a small jar and mixed to suit, this was to be applied by airbrush. The face area of the head was given a coat of this tan mix, then a darker mix was applied around the eyes and mouth to add depth to the creases and add shading. Another coat of tan was applied to cover some of the darker over sprayed area, and a lighter mix of tan was applied as a highlight. The eyes were brush painted with white acrylic, the black pupils were added, which were then given a wash of silver, a wash of pink was applied to give the corner of the eyes a bloodshot look.

1/1 scale Teraleptil latex masks.

The first mask was painted freehand by Airbrush using thinned acrylic based car spray paint, which was decanted into small jars and mixed as and when needed.

The second mask was painted pretty much as the as the fist one was, but had additional dry brushing and blending added to bring out more surface detail. The eyes were painted differently as I had a better reference source for this one.

Reference used was from the Dr Who Magazine 'The Visitation' issue, The Visitation VHS Video cassette and the odd convention photograph.

1/1 scale fibre glass head. The dark green background colour for the Ice Warrior head had to be mixed by spraying paint from the cans into a smaller jar, so that the paint could be mixed into the correct colour and then thinned enough for it to be applied by Air brush. Several lighter green layers were then dry brushed on.

Invasion of the Cybermen.

25mm scale diorama using Harlequin Dr Who Miniatures. Two of the Cybermen have had their poses altered to give a variation to the miniatures to give them a little action.

Invasion of the Cybermen.	Ice Warrior.	The Web of Fear.

25mm scale diorama using Harlequin Dr Who Miniatures. The Cybermen have had their poses altered to give a variation to the miniatures and give the diorama little action. The base is made from MDF and Polystyrene coving, with brick effect plastic card added to the walls and walkway. The water was made from interior filler which was lightly textured to give the effect of running water. These figures are now deleted.	1/6th scale vac form plastic kit. Produced by Sevan's Models. This figure is now deleted.	25mm scale diorama using Harlequin Dr Who Miniatures. The base is made from MDF and Polystyrene coving, with brick effect plastic card added to the walls and platform. The rail was standard HO/OO gauge track. The posters were scanned from a Dr Who book and are original posters from 1967. These figures are now deleted.

Robots of Death SV7 Mask & Full Head piece	Nicholas Courtney, The Brigadier.

1/1 scale fibre glass Mask and Full Head piece from the Dr Who episode 'The Robots of Death'. The mask and head represent the Robot SV7.	Nicholas Courtney, singed 10" x 8" photograph, out of my own collection. Nicholas Courtney signing autograph's at a show in Alfreton Derbyshire in late 2001.

Cybermen heads.

The Cyberman heads are all to 1/1 scale and are made from Fibre Glass, they are based on the 'Tomb of the Cybermen', 'Invasion of the Cybermen', 'Revenge of the Cybermen' & 'Earthshock' variant suits. Initially I was given the job of altering the head of the 'Tomb' Cyberman to make it more accurate with the Cyber heads that were featured in that particular episode. This involved widening the mouth and drilling the air vent holes into the neck. The surface of the head was sanded with fine grit wet & dry paper to remove runs from the original paint finish, then a coat of grey primer was applied to the head. When the primer was fully dry, any small holes or cracks etc in the surface were filled using fine surface filler. This was then sanded down again with very fine grit wet and dry paper to give the head a nice smooth finish, and given another light coat of primer. The head was then completely repainted with two coats of silver spray paint, and given a couple of coats of lacquer to give it a lustrous finish. This led to the refurbishing other Cybermen heads. The 'Invasion' Cyberman head was simply a clean up and re paint job. The head was sanded down with very fine grit wet & dry paper and primed and filled where necessary and then repainted with two coats of silver spray paint. It was then polished quite heavily with a soft cloth, and given a couple of coats of lacquer to finish it off. The Revenge Cyber Leader was prepared in exactly the same way as for the other Cybermen heads. But was given three light coats of satin black, when the black was dry, the face plate was masked off and sprayed silver, then given a coat of lacquer to finish it. The Earthshock Cyber leader head was prepared and finished in exactly the same as for the other Cyber heads. The only difference being that the silver bands on the black pipes had a mask applied before the black was applied by spray.

Picture 1 and 2 show the Cyber Head with the modifications. Picture 3 show's the completely finished head with chrome tape added around the eyes and mouth. Picture 4 shows the finished 'Invasion' head. Picture 5 shows the finished Revenge Cyber Leader head. Picture 6 shows the finished Earthshock Cyber Leader head.

Please note that non of the models, figures or dioramas featured in this gallery are for sale or can be ordered.

The Galleries on this site are intended strictly for personal use. This site has not intended to infringe on the intellectual properties of any copyright holders. All copyrights belong to the creators and/or current license holders.