Star Wars Models

Star Wars Model Gallery.

To go back to the Main Menu or click Here

Click on thumbnail to see larger image.

Han Solo.

C3P0 & R2D2.

Darth Vader.

Luke Skywalker.

Darth Vader.


1/6th scale vinyl kit. Produced by AMT.	C3P0 & R2D2 with a bronzed finish. Injection plastic C3PO produced by MPC, R2D2 is a soft vinyl figure produced by Applause.	1/6th scale vinyl kit produced by AMT. This kit has had changes made to the pose, and is based upon the Empire Strikes Back. The cape had to be completely replaced.	1/6th scale vinyl kit. Produced by Polydata. This kit comes in pre coloured vinyl. I gave the kit a full repaint and replaced the Light Sabre blade with a more accurate version.	This Darth Vader model is the MPC kit. The effect was achieved by spraying the figure black and then lightly dry brushing gun metal and silver highlights.

Stormtrooper.	Han Solo.	Princess leia.	Han Solo on Taun Taun.	Yoda.

Han Solo 1/6th scale vinyl figure, produced by Kaiodo/Screamin.	Han Solo 1/6th scale vinyl figure, produced by Kaiodo/Screamin.	1/6th scale vinyl kit. Produced by Polydata. The kit comes in pre coloured vinyl, I have given the model a full repaint.	1/6th scale TaunTaun and rider. The TaunTaun is scratch built, the rider is based on a conversion from an Action Man figure.	Yoda figure in 1/6th scale. This figure is fully scratchbuilt.

Slave 1.

Escape from Hoth.

X - Wings.


Slave 1 diorama. The Slave 1kit was produced by Airfix/MPC and is an injection plastic kit. The Star Wars Miniatures are white metal produced by West End Games.	Rebel Transport and X wings. The Transport and X wings are taken from the 'Rebel Base' diorama set from MPC, with some slight modifications made. The original laser barrels on the X wings were replaced with brass rod.	X wings, injection plastic kits, Produced by MPC.

TIE Interceptors.	ATST Diorama.	ATST Diorama.

Tie Interceptors, injection plastic kits, Produced by MPC.	25mm ATST diorama, depicting the Ewoks and Chewbacca attacking a Scout Walker. The ATST is an injection plastic kit produced by MPC. The miniatures are Pewter and produced by West End Games.	25mm ATST diorama, depicting the Ewoks attempts to down a Scout walker with felled tree trunks. The ATST is an injection plastic kit produced by MPC. The miniatures are Pewter and produced by West End Games.

Luke and Leia.

Swamps of Dagobah.

Luke is a 1/6th scale vinyl kit produced by AMT, with new utility belt and pouches added, there is also a scratch built Storm Trooper Blaster. Leia is a 1/6th vinyl kit produced by Kaiodo, this particular kit is a resin recast.

25mm Dagobah diorama, depicting Yoda raising Lukes X wing from the swamp. The X Wing is an injection plastic kit produced by MPC. The Star Wars miniatures are Pewter and produced by West End Games.

Darth Vaders TIE Fighter.

Bronze finish Republic Cruiser, Blokade Runner and Tydirum Shuttle.

Darth Vader's prototype Tie fighter, injection plastic kit, Produced by MPC.

The three star ships have been given a bronze effect finish. All three models were released as part of the Action Fleet range of Star Wars vehicles.

Luke and Yoda.

Lando Calrissian.

Y - Wing Fighter.

Luke with Yoda. This is a fully repainted vinyl figure originally originally released by Applause.

1/6th scale vinyl kit. Produced by Polydata. This kit comes in pre coloured vinyl, After filling the joints, I gave the kit a complete repaint.

Y Wing Fighter. Injection plastic kit by MPC.

Mini Displays Bronze finish.	Mini Displays Pewter finish.

25mm scale Twin Miniature displays bronzed versions. The effect being achieved by spraying the models black, then dry brushing with bronze and copper acrylic paints.	The metal models were washed in an Antique mix and then burnished with a suede brush to bring out the highlights.


Gungan submarine and Oppee Sea Killer.	ATAT.	Obi Wan Kenobi.

The Oppee Sea Killer is a converted action toy, with tongue added from Milliput. The Gungan Submarine is a novelty bubble bath holder, which has had a complete repaint, and just happens to be around the same scale as the Oppee.	Diorama built to approximately 20mm scale and is completely scratch built. The figures used were Airfix HO OO scale.	1/6th scale vinyl kit. Produced by Polydata. This kit comes in pre coloured vinyl, After filling the joints, I gave the kit a complete repaint, and replaced the Light Saber blade with a more suitable blade.

Dagobah Swamp.	Dewback Patrol.	Tuskan Raiders.	Landspeeder.

Dagobah swamp diorama. X Wing is an injection plastic kit. X Wing produced by MPC (12 inch version).	The Dewback is a small plastic toy produced by Galoob. The Sand Troopers are West End Games Pewter miniatures, one of which has been modified to sit on the Dewback, the lance is made from brass rod. The effect was achieved on the plastic model by spraying them black and then lightly dry brushing gun metal and silver highlights. The metal models were washed in an Antique mix and then burnished with a suede brush to bring out the highlights.	Sand People raiding party. Bantha and Tusken Raiders are West End Games Pewter miniatures. The Moisture Vaporator was scratch built from a spark plug and plastic rod. The metal models were washed in an Antique mix and then burnished with a suede brush to bring out the highlights.	The metal models were washed in an Antique mix and then burnished with a suede brush to bring out the highlights.

A - Wing Fighter.	Tusken Raider.	A New Hope Plaque.	Dewback Patrol.

A Wing Fighter. Injection plastic kit produced by MPC	1/6th scale vinyl kit. Produced by Polydata. This kit comes in pre coloured vinyl. I gave the kit a full repaint to add more weathering to the clothes. The first photograph was taken out doors, photographed from underneath, with the model slightly above me. A sunburst effect was added in a paint program later to make the picture more realistic.	4 1/2 " Resin Plaque based on the artwork of the Hildebrandt brothers for the original Star Wars movie. Sculptured by Darren kefford.	25mm Dewback Patrol bronzed version, with the effect being achieved by spraying the models black, then dry brushing with bronze and copper acrylic paints.

B - Wing Fighter.	Royal Naboo Fighter.	Jabba's Throne Room.	Ronto.

B Wing, injection plastic kit, produced by AMT/ERTL, with a bronzed finish.	This model of the Naboo fighter is the die cast kit version from AMT/ ERTL and is in 1/48th scale.	Jabba's Throne room. West End Games Pewter miniatures. The metal models were washed in an Antique mix and then burnished with a suede brush to bring out the highlights.	Jawa's transport. The Ronto is a small plastic toy produced by Galoob.

	Imperial Star Destroyer.

	The Rebel Blockade Runner tries to out run the Imperial destroyer. These are Mini Metal miniatures that were produced by Comet Miniatures.